Your Universal Remote Control Center
RemoteCentral.com
Complete Control by URC Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Nvidia Shield tv pro codeset
This thread has 9 replies. Displaying all posts.
Post 1 made on Monday July 20, 2020 at 09:56
mitch236
Long Time Member
Joined:
Posts:
December 2006
38
I am trying to get my new Nvidia Shield TV Pro integrated with my URC MX-990 but the codeset in Complete Control doesn't work (I assume it works with older Nvidia's). I'm using a FLIRC into the Nvidia's USB. Has anyone gotten this to work?

Thanks!
Post 2 made on Tuesday July 21, 2020 at 09:48
db999md
Junior Member
Joined:
Posts:
April 2020
10
you need to plug your FLIRC into your computer, load up the software, and that is how you tell the FLIRC which remote codes translate into which button on the shield remote. FLIRC does NOT just add a remote receiver to the sheild, it is smarter than that.

you can use the nvidia shield codesset so you should not need to re-prog your remote.

load the software and it will become apparent what you need to do
OP | Post 3 made on Friday August 21, 2020 at 21:11
mitch236
Long Time Member
Joined:
Posts:
December 2006
38
On July 21, 2020 at 09:48, db999md said...
you need to plug your FLIRC into your computer, load up the software, and that is how you tell the FLIRC which remote codes translate into which button on the shield remote. FLIRC does NOT just add a remote receiver to the sheild, it is smarter than that.

you can use the nvidia shield codesset so you should not need to re-prog your remote.

load the software and it will become apparent what you need to do

Thanks for that explanation. I downloaded FLIRC and programmed the device to NVIDIA Shield Gen 2 and it still doesn't work. Any suggestions?
Post 4 made on Wednesday September 2, 2020 at 21:45
db999md
Junior Member
Joined:
Posts:
April 2020
10
If I recall, the order was :

1. set up the URC remote - you can choose nvidia shield codeset or anything you want
2. load the FLIRC software, choose shield gen 2, and then you need to teach the flirc the codes from the URC remote using the software.

that should get u on the right track
Post 5 made on Saturday March 26, 2022 at 14:29
audvid
Founding Member
Joined:
Posts:
August 2001
103
The preceding suggestion to use FLRIC, I thought, worked well. It was very easy to program the FLIRC but it was giving me double bounce. I thought I could live with it/solve it. There had been a fix via software setting in the FLIRC software but for some strange reason, that setting is no longer available for modification.
So, I had to get rid of FLIRC.

inteset 422-3 remote and Inteset IReTV USB IR Receiver combination are very inexpensive and work perfectly.
You can easily program the Inteset remote for IR codes of shield tv (and fire tv). Then you can teach the IR to any programmable remote.

Only one issue I am having is - I have Xantech ml95 IR extender system (equipment is in next room) and the IR from Inteset works directly when pointed to the IreTV IR receiver but it does not work, when I try to use the Xantech system (IR emitter from xantech was taped to the IR receiver and yes, it is emmitting IR but shield is not responding). Does it have to do something with the IR frequency being used? I just ordered a 38 khz capable IR emitter. My Xantech ML 95 is 20 khz to 50 khz. The connecting block xantech 791-44 is 30 to 60 khz. I am assuming it is the emitter? Just today, I found an emitter on amazon, which specifically says 38 khz. If anyone know of general purpose emitters which cover 30 to 60 khz, please let me know.

Does anyone know what carrier frequency Shield IR codes use?
My xantech extender system works just fine with Fire TV IR codes.

Thanks.

Last edited by audvid on April 10, 2022 10:15.
Post 6 made on Saturday April 2, 2022 at 09:45
audvid
Founding Member
Joined:
Posts:
August 2001
103
Using flirc: While I use the up/down/left/right/enter buttons, frequently, it moves in two steps and occasionally in one step. For example, if i press left button, it moves 2 steps lefts most of the time and one step (as intended) less number of times. How do I fix this?
Post 7 made on Saturday April 2, 2022 at 09:47
audvid
Founding Member
Joined:
Posts:
August 2001
103
Using flirc: While I use the up/down/left/right/enter buttons, frequently, it moves in two steps and occasionally in one step. For example, if i press left button, it moves 2 steps lefts most of the time and one step (as intended) less number of times. How do I fix this?
PS: I found the answer.
[Link: support.flirc.tv]
Post 8 made on Saturday April 2, 2022 at 09:53
audvid
Founding Member
Joined:
Posts:
August 2001
103
Using flirc: While I use the up/down/left/right/enter buttons, frequently, it moves in two steps and occasionally in one step. For example, if i press left button, it moves 2 steps lefts most of the time and one step (as intended) less number of times. How do I fix this?
PS: I thought I found the answer but the interkey setting is no longer available as an option.
[Link: support.flirc.tv]
Post 9 made on Saturday April 9, 2022 at 18:17
audvid
Founding Member
Joined:
Posts:
August 2001
103
I have the ccp file for nvidia shield IR codes. You just need an IR to usb receiver available on amazon for $13. I can give you the model number later, if ou are interested. If you want just IR codes, buy the Inset model INT-422-3 and it can be easily programed with preset codes for shield and firetv
if you want the ccp file, you can PM your email address.
Btw, the FLIRC was useless. There was no easy way to avoid "double press" issue.
Post 10 made on Saturday April 9, 2022 at 23:50
tomciara
Loyal Member
Joined:
Posts:
May 2002
7,734
You couldnít set the number of repeats to 1?  I had to do that when the Roku 4 started moving two steps at a time.
There is no truth anymore. Only assertions. The internet world has no interest in truth, only vindication for preconceived assumptions.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse