|
|
|
The following page was printed from RemoteCentral.com:
Topic: | MX-900 button press reliability This thread has 188 replies. Displaying posts 136 through 150. |
|
Post 136 made on Saturday October 14, 2006 at 18:58 |
davet2020 Senior Member |
Joined: Posts: | February 2005 1,051 |
|
|
On October 11, 2006 at 12:04, Tom Ciaramitaro said...
Since I have an earlier non-updated version of the editor, is that why I have fewer (basically NO) problems??? Tom, Does anyone know the update that started all these problems? I have some 900s that I need to program for some upcoming jobs. I also have some laptops that may have older versions of the MX editor on it. If I knew what the version that Tom had I would use the old MX editor to do the programming until this problem is fixed. Does this make sense to you all? Dave T.
|
If you are going to do the job...why not do it the right way? www.fairfaxavi.com |
|
Post 137 made on Saturday October 14, 2006 at 21:18 |
cfive-1 Lurking Member |
Joined: Posts: | September 2006 3 |
|
|
On October 13, 2006 at 13:21, Mitch57 said...
For me the currently released version (1.10.090) that's available to the public works better then either of the two most recent beta releases. Have you tried this release yet?
Mike hasn't seen the failed "Press and Hold" macro issue that I'm having. Has anyone else with the latest beta seen this issue besides me? Mitch57,how do I get 1.10.090 to try it out.I have 1.10.086,F/W:1.40,IR DB:1.76 and my MX-900 misses very often any butons.I live in Australia and URC dos not respond to my email.Thanks,cfive-1.
|
|
Post 138 made on Sunday October 15, 2006 at 00:43 |
Tom Ciaramitaro Loyal Member |
Joined: Posts: | May 2002 7,967 |
|
|
On October 14, 2006 at 18:58, davet2020 said...
Tom,
Does anyone know the update that started all these problems? I have some 900s that I need to program for some upcoming jobs. I also have some laptops that may have older versions of the MX editor on it. If I knew what the version that Tom had I would use the old MX editor to do the programming until this problem is fixed.
Does this make sense to you all?
Dave T. My zipfile says 1.10.079 but under "about" says .080.
|
There is no truth anymore. Only assertions. The internet world has no interest in truth, only vindication for preconceived assumptions. |
|
Post 139 made on Sunday October 15, 2006 at 01:22 |
GregoriusM RC Consultant |
Joined: Posts: | December 1999 9,807 |
|
|
I'm having roughly the same problems. I just can't be sure that a button press will send out the IR code. 99.99% of the time it shows on the LCD screen that it has gotten the button press, or if I turn on the beep, it will beep, but the code does not get sent.
I like the remote, although I'm not a huge fan of the flat buttons, but I think I'm just still not used to the layout compared to my multi-year-used 850 - however, it is driving me nuts that I just can't pick it up and use it like any other remote and be confident that a button press will be exactly that - a button press.
On another note, I have had my 900 since after the problems had started with other people, so I don't know which Editor/firmware versions are the ones that had less problems/no problems before that.
|
When ignorance is bliss, ‘tis folly to be wise. |
|
Post 140 made on Sunday October 15, 2006 at 01:24 |
Mitch57 Active Member |
Joined: Posts: | June 2003 722 |
|
|
A live update should update your remote to this version:
Version 1.10.090 Firmware 1.41 IR DB: 1.77
If you don't get this version when you live update then I would suggest contacting your "Authorized Dealer" to see if they can help you get the current version.
|
|
Post 141 made on Sunday October 15, 2006 at 09:01 |
Ericjb Active Member |
Joined: Posts: | February 2004 655 |
|
|
On October 15, 2006 at 01:22, GregoriusM said...
I'm having roughly the same problems. I just can't be sure that a button press will send out the IR code. 99.99% of the time it shows on the LCD screen that it has gotten the button press, or if I turn on the beep, it will beep, but the code does not get sent.
I thought the symptom in this thread was when you press a button it does not show on the LCD that you pressed a button and it does not beep. I would look at your RF if your remote is showing a press and beeping but nothing is happening. I have not seen a lot of failures on my 900 but every failure I do see is no beep and no LCD change and consequently no command. I have never had my MX-900 beep with no command issued.
|
There are 10 types of people in this world, There are those who understand binary, and those who don't! |
|
Post 142 made on Sunday October 15, 2006 at 09:10 |
cfive-1 Lurking Member |
Joined: Posts: | September 2006 3 |
|
|
On October 15, 2006 at 01:24, Mitch57 said...
A live update should update your remote to this version:
Version 1.10.090 Firmware 1.41 IR DB: 1.77
If you don't get this version when you live update then I would suggest contacting your "Authorized Dealer" to see if they can help you get the current version. Hi Mitch57,if this replay is meant for my post 137 thank You,but I can not use it.I do not have MX Editor with live update and my "Authorized Dealer" is out of Business.Any other sugesstion would be appreciated.
|
|
Post 143 made on Sunday October 15, 2006 at 12:21 |
Tom Ciaramitaro Loyal Member |
Joined: Posts: | May 2002 7,967 |
|
|
If that's addressed tome, I'm going to keep using my (working) old version. I can't mess around with bugs if I am leaving a remote in a client's home.
|
There is no truth anymore. Only assertions. The internet world has no interest in truth, only vindication for preconceived assumptions. |
|
Post 144 made on Sunday October 15, 2006 at 15:20 |
Mitch57 Active Member |
Joined: Posts: | June 2003 722 |
|
|
On October 15, 2006 at 09:10, cfive-1 said...
Hi Mitch57,if this replay is meant for my post 137 thank You,but I can not use it.I do not have MX Editor with live update and my "Authorized Dealer" is out of Business.Any other sugesstion would be appreciated. Yes. The post was addressed to you. I would suggest calling URC and explaining your situation. Hopefully they will send you a link to get the latest updates.
|
|
Post 145 made on Sunday October 15, 2006 at 17:11 |
GregoriusM RC Consultant |
Joined: Posts: | December 1999 9,807 |
|
|
My symptoms are the same whether I have RF turned on or not.
|
When ignorance is bliss, ‘tis folly to be wise. |
|
OP | Post 146 made on Sunday October 15, 2006 at 22:58 |
Loraquest Long Time Member |
Joined: Posts: | June 2002 348 |
|
|
On October 15, 2006 at 09:01, Ericjb said...
I thought the symptom in this thread was when you press a button it does not show on the LCD that you pressed a button and it does not beep ... I have never had my MX-900 beep with no command issued. Someone please correct me if I'm wrong, but it appears that URC's attempt to fix the original problem has spawned new problems.
|
|
Post 147 made on Monday October 16, 2006 at 00:39 |
GregoriusM RC Consultant |
Joined: Posts: | December 1999 9,807 |
|
|
On October 15, 2006 at 09:01, Ericjb said...
I thought the symptom in this thread was when you press a button it does not show on the LCD that you pressed a button and it does not beep. I would look at your RF if your remote is showing a press and beeping but nothing is happening. I have not seen a lot of failures on my 900 but every failure I do see is no beep and no LCD change and consequently no command. I have never had my MX-900 beep with no command issued. That certainly is NOT the way my 900 is "working".
|
When ignorance is bliss, ‘tis folly to be wise. |
|
Post 148 made on Monday October 16, 2006 at 12:09 |
On October 2, 2006 at 15:46, GregoriusM said...
I'm going to do some investigative work with my 1000. I've been focusing on the 900 and a couple of other URC remotes as of late.
They do have similar button action. Too soft in my opinion. Greg: Did you ever find similar failures on your 1000? Russ
|
|
Post 149 made on Monday October 16, 2006 at 13:39 |
Surf Remote Loyal Member |
Joined: Posts: | July 2001 5,958 |
|
|
Everyone with the beta software, please try the new 093b version. I'm getting good response with it.
|
www.SurfRemoteControl.comTHX-certified video calibrator and contributing writer, ProjectorReviews.com |
|
Post 150 made on Monday October 16, 2006 at 20:44 |
GregoriusM RC Consultant |
Joined: Posts: | December 1999 9,807 |
|
|
.093b also is updated to 1.43 firmware.
Notice that it also says "Downloading Program" this time, not just the Data file.
I'm about to try it out now.
|
When ignorance is bliss, ‘tis folly to be wise. |
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|