Post 1 made on Friday October 25, 2013 at 17:38 |
jcp411 Lurking Member |
Joined: Posts: | January 2013 3 |
|
|
Installing a Russound unit for a client and we are wanting to control it via RS-232 with the URC KP-4000 and MX-5000. So far we haven't been able to get any commands to work with it. The status light is lighting up on the MRX-1 when we send a command but nothing is working.
Unsure if I have the right commands although it's the right model number in the URC database.
Serial Properties are Baud Rate: 19200 Data: 8 Parity: None Stop: 1
This is the settings Russound sent me...
Taken from “Russound_Controllers_Protocol_v1_00_04.pdf”
The following settings must be made to the RS-232 serial COM port used to interface with the Controllers: • 19200 baud rate • 1 Start bit • 1 Stop bit • No flow control • No parity
Any ideas or directions to move forward?
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.