I have a Barco projektor (808s) and a Pronto NG 950, and I just wonder if someone has solved the problem that the ProntoNG cannot learn Barco IR codes??
I talked to Philips but they don´t wanna help..

Try calling Runco. They might be able to help you.

There are 11 Barco configs in the file area. Look around here and do some experimenting. Try the model # closest to yours.

Dave D'Arche

I have already tried every config, that is available...... It seems like a problem that cannot be solved..... Help.

Have you tried searching for threads containing "Barco"? There should be quite a few.

Didn´t find anything helpful.... But i did find this!

-------------
kogez,

I'm afraid I'm going to be the bearer of bad news, but neither the TSU3000 nor 7000 (nor the Neo for that matter) will work for the Barco 808/1208 series projectors. The earlier Prontos worked fine, but not these models. I've reported the problem to Philips and they initially tried to help, but eventually they just stopped responding to my emails and seem to have lost interest.

Some of the very helpful and knowlegable members of the forum here have also helped out with some experiments, but alas, they too were unsuccessful, so it looks like that is how it will stay.
------------------------------------------

I give up,....

I have just bought an original barco remote on ebay.... :-(