| Post 1 made on Wednesday June 19, 2002 at 05:32 |
Kristoffer Long Time Member |
|
|
I'm looking for discrete codes for my TV, a Pansonic TX-32PK20. I have tried the ones here on the site, but they don't work.
Anyone know where I can find these codes?
Thanks in advance!
|
Kristoffer
|
|
| Post 2 made on Wednesday June 19, 2002 at 08:11 |
jarmstrong Founding Member |
Joined:
Posts: | March 2002
1,780 |
|
|
I would suggest that you retry using the pronto hex the discrete codes for Panasonic TV (not the alternates).
I just decoded a ccf file for a TX-32PK20D and its Power Toggle is Panasonic protocol device 128 command 61. The hex posted is Panasonic protocol device 128 commands 62 and 63 that are discrete On and Off. Even my 13 inch Panasonic responds to these discrete codes.
My point is that your TV almost certainly uses the generic Panasonic device code 128 and if it will respond to discrete commands then it is likely 62 and 63.
The alternate commands posted are the completely different Old Panasonic protocol and are actually a toggle command meaning that if you decode them they are both device 0 command 32 and should be removed.
HTH,
Jon
|
|
| OP | Post 3 made on Thursday June 20, 2002 at 12:33 |
Kristoffer Long Time Member |
|
|
I tried them again and they do not work. The red LED on my TV flashes, but nothing happens. :(
|
Kristoffer
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
