I would suggest that you retry using the pronto hex the discrete codes for Panasonic TV (not the alternates).

I just decoded a ccf file for a TX-32PK20D and its Power Toggle is Panasonic protocol device 128 command 61. The hex posted is Panasonic protocol device 128 commands 62 and 63 that are discrete On and Off. Even my 13 inch Panasonic responds to these discrete codes.

My point is that your TV almost certainly uses the generic Panasonic device code 128 and if it will respond to discrete commands then it is likely 62 and 63.

The alternate commands posted are the completely different Old Panasonic protocol and are actually a toggle command meaning that if you decode them they are both device 0 command 32 and should be removed.

HTH,

Jon