Your Universal Remote Control Center
RemoteCentral.com
Complete Control by URC Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
MX-980 Programming - How to replace a device in CCP
This thread has 6 replies. Displaying all posts.
Post 1 made on Monday February 25, 2019 at 01:09
chucksmi
Lurking Member
Joined:
Posts:
October 2011
6
My dealer programmed my MXĖ980 for my home environment and provided me with the CCP software. Iíve used it to fix a number of issues. My Onkyo receiver died and I had to replace it. It generally has worked with my MX-980 but I have a couple of problems I would like to fix, probably best done by configuring in the new Onkyo Receiver, replacing the IR commands from my old receiver. What is the best way to migrate to the new receiver? Or if I purchased a new TV, how would I configure that?

Also, is there a way to query CCP to find out what device models are being used? Can I somehow go through my device list and find out the brand and model numbers currently in use, say for my TV, my receiver, my Blu-Ray player etc.?

Responses are much appreciated.
Chuck
Post 2 made on Monday February 25, 2019 at 13:20
KenSmith58
Long Time Member
Joined:
Posts:
June 2011
79
If you have the CCP software you should be able to download the programming manual. It has everything you're asking about.
OP | Post 3 made on Monday February 25, 2019 at 21:08
chucksmi
Lurking Member
Joined:
Posts:
October 2011
6
I have the programming manual and know how to setup a device, of course with its brand and model. I donít know how to find this info later - itís like Iím having to setup a device all over again from scratch. Do I have to create a new device, like the receiver or new TV, and modify all references to the old devices to the new ones, then delete the no longer used devices?

I donít recall this being mentioned in the manual, but I will review it again tonight. It has been awhile since I read it completely. Any further guidance would be appreciated. Thank you for responding to my question.

- Chuck
Chuck
OP | Post 4 made on Tuesday February 26, 2019 at 20:01
chucksmi
Lurking Member
Joined:
Posts:
October 2011
6
It looks like I can overwrite a device and
Chuck
OP | Post 5 made on Tuesday February 26, 2019 at 20:08
chucksmi
Lurking Member
Joined:
Posts:
October 2011
6
It looks like I can overwrite a device and then have to modify all related macros using the old device and map to the new device commands. An example being referencing an HDMI port for a DVD and having to remap to the corresponding DVD /HDMI port on the new receiver.

I still however donít know how to query existing device brands/ models for current devices in the model. More experimentation might shed some light.

- Chuck
Chuck
Post 6 made on Wednesday February 27, 2019 at 20:56
JoeFlabitz
Select Member
Joined:
Posts:
December 2008
1,517
Hire a pro...
Post 7 made on Friday April 9, 2021 at 19:01
massimo
Lurking Member
Joined:
Posts:
July 2013
1
This site is designed to avoid that.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse