Post 1 made on Saturday October 14, 2006 at 22:36 |
Dave E Long Time Member |
Joined: Posts: | September 2005 282 |
|
|
I'm having the same kinds of problems with my MX-3000 as others have stated that they are having with the MX-900. Occationally I will press a button, it beeps, nothing happens, then 3 seconds later the MRF-300 and the associated IR flasher will blink. Also, occationally I'll press a button, it beeps and nothing happens, no MRF-300 or flasher blink. The code wheel on the MRF-300 is set to F. I changed it to 0 to check for RF interference and had none, although I didn't leave it on 0 for more than a minute. I am using the current software. As of October 14 it says no new updates are available. The date code on the MX-3000 is 040905. I bought it and didn't do much with it but I am working with it now and have encountered this problem. Was this a known problem with the older MX-3000 that has now been corrected? Has anyone else had similar experiences?
|
|
Experience is what you get when you don't get what you want. Any wire cut to length will be too short. I must be a near GENIUS. All my teachers told me I was at the very PEAK of the bell curve! |
|