Hi all, I've just upgraded the firmware in my RU950 to the latest verion and am now having problems. :o(
The main thing I noticed is that the volume control now goes up in increments of 2 rather than 1 making it impossible to get just the right volume.
I tried using a soft button rather than the hard button, but get the same results.
I thought I'd try limiting the duration however that just stops it working altogether - interestingly enough even if I go back to default duration (I have to delete the soft button and recreate it to get it working again).
I have also found that it is now impossible for my remote to learn signals from my B&O whereas it used to just be tricky - interestingly enough one of the updates was supposed to make this easier!!
Any suggestions particularly for the volume problem please?
I found an old copy of the firmware (3.6.7) here and have loaded that, and the problem goes away, but then so does the ability to use hard buttons with one click which I really want. The problem seems to start at 3.9.8.
Thanks,
Jeddy
Last edited by Jeddy
on May 18, 2007 13:51.