Post 3 made on Sunday January 13, 2002 at 21:51 |
Chuck_IV Founding Member |
Joined: Posts: | January 2002 107 |
|
|
1. That is the case with almost all remotes. Some button just won't program.
2. Download and install version 1.3(dated 12/20) and you should not have a problem.
3. True, you cannot edit the top level screen from the software, however, you CAN edit it via editing the .xml file directly. It's not great it is not copatible with .ccf files, however a new files base is on the way containing alot of .NCF files, which are for the NEO. Once the user base gets going, there will be plenty out there. The original Pronto had to build a user base too.
4. I'm not sure what you are looking for, from a remote, but the NEO is not for you. I suggest you stick to the preprogrammed remotes that can learn a few buttons.
The NEO is NOT difficult to set up. Sure it takes a little time, but something this versital WILL take time. If you take the time to understand what you are dealing with, beforehand, you will have a much more pleasant experience, then next time.
This message was edited by Chuck_IV on 01/14/02 03:19.27.
|
|
|