The following is word for word from instructions for another option called "Quick Search" :-
"If you are unable to find the correct code for your device in the BRAND CODE LIST, then you can use this procedure to search automatically for a code.
1. Press & hold down the SET key, press the device key (TV1/VCR etc). The LED indicator will be ON. Release the pressed keys. 2. Press the SET key again and release it. The unit is now in QUICK SEARCH mode, and the LED will keep flashing.
{The direction of searching can be changed by pressing the SET key} 3. Point the control unit at the device you are setting up and press the POWER key. If the device operates, check the rest of the functions such as VOL, CH+/-. If the device cannot be controlled repeat the instructions above.
To change the direction of search, press the SET key.
To leave the search mode press the device key and the LED indicator will go off".
End.
Make of this what you will. Any feedback on successful completion would be much appreciated.