From a PC on the wireless network (same router as pronto connects to), can you telnet to Port 251 on the escient

192.168.1.116:251 and key the following:

ESCX5007[Enter]
Assumption is that pressing [Enter] will send ASCII 13/Carriage Return.

If you get a response, that is what we are looking for. If not, there's a problem with your network. If you do get a response, then Pronto is configured incorrectly or your remote is faulty.

Cannot remember if we tried this but can you change from passphrase to a hex key (or completely disable security for a bit) to see if things work?


If you can telnet to this port on this host (your escient) and you can get a response, there is NO reason that pronto should not be able to do this.