Post 8 made on Monday July 5, 2010 at 01:59 |
buzz Super Member |
Joined: Posts: | May 2003 4,380 |
|
|
Guy Palmer,
Using PEP2, at the top of the action list panel, check out the tools. You can set relays and sense power.
There is a constant voltage output on the RFX9600. This can be wired through a relay contact and sensed by an input pin. As you switch the relay, the power sense pin will toggle and an action will execute or not.
This will not be a perfect scheme because someone could use the projector's native remote or press the power button causing, the relay state to be out of sync.
|
|
|