Your Universal Remote Control Center
URC Text Series Remote Control File Area
Up level
Up level
The following page was printed from

Before you continue!

This file area has been replaced with a newer one!
As of 2011, this section is no longer being updated, and some files may show as unavailable. For free access to all of these downloads and many newer ones, visit our NEW file area at:

You are currently browsing through the Home Theater Master MX-700 & MX-800 and Complete Control MX-850, MX-900, MX-950, TX-1000 file area. To return to the beginning click here.

 Files > URC Text Series > Systems > All
There are 105 System Files.
Displaying files 1 through 10 on page 1 of 11.
[ < Back | Next > ]
Page: 1 2 3 4 5 6 7 > ]
Show: All (A B C D E F G H K L M N O P Q R S T W Z)
Sort by: [ Title | Date | Author ]
5 Room Whole House System
For: URC MX-950
By: Byron Anderson-Lister
This complex system file allows me to control 5 rooms worth of equipment. Essentially I have 3 identical remotes that are deployed into the 3 rooms. Users select a room and can then choose to listen or watch what's available in that room.

Some rooms turn on equipment (B speakers for the kitchen or 2nd/3rd zones) from the main receiver which adds some complexity. Since I couldn't get hold of an MC-400 you can't move a remote from room to room without it wiping the variables associated with the old room. This is an acceptable compromise is my situation.

I've setup on/off menus that give the user various options with regards to what they want to turn on or off (or even reboot) and there is rudimentary help menu. When switching activities in a room (using the jump button to go back to the main activities for a room) the remote checks if devices have been left on and asks the user if they want to turn it off or not).

I thought it worth posting this as it shows some complex programming (albeit not that neat). I make extensive use of variables and press hold functionality to all me to easily add a new device.

Updated: December 29, 2009  Size: 340kb
Activity Based, Macro Driven
For: HTM MX-700 (System)
By: Gerald Koth
This is the type of macro driven activity based Main Screen I use for all my remotes. One button push turns on and sets the inputs and outputs for all of the components required for a given activity. Once an activity is started there are other macros to switch between activities. And finally a macro to turn the system off from the current activity. I usually put together a rough flow chart to aid in getting the macros right.
Updated: December 25, 2006  Size: 20kb
Alan Minchew's MX-700 Setup
For: HTM MX-700 (System)
By: Alan Minchew
A complete MX-700 setup with discrete codes for most devices.
Updated: December 01, 2003  Size: 27kb
Arna Perry's System Setup
For: HTM MX-700 (System)
By: Arna Perry
This is a first cut at my system. I used the 2nd page of Main for my on/off switches. Please feel free to comment and suggest.
Updated: December 01, 2003  Size: 20kb
Aubrey's MX-900 Theater
For: URC MX-900
By: Mramos
A complete home theater with 2nd zone.
Updated: December 25, 2006  Size: 16kb
BNC-RCA-RG59's MX-900
For: URC MX-900
I made this remote for an old couple that wanted to be able to record 25 shows a week. They used to have 5 VCR's around the house in different rooms. Now they have one Dual Tuner HD Tivo. After a week of use the only complaint was that they wanted to record two shows at the same time while watching a third (Monday night football). So I connected another HD DVR Comcast box from another room into the mix using RF and like the feature to pause live tv any time and be able to fast foward through the commercials. Still looking for the new 30sec skip for the 3 series TIVO if anyone is holding.
Updated: December 25, 2006  Size: 38kb
Badger's Den MX-700
For: HTM MX-700 (System)
By: Scott Pirk
Activity-based macros on main page ensure clarity for first-time users. Fast macros to jump between common operating modes (Cable, DVD, etc.). System-off macro switches TV and Receiver back to most-used mode (cable viewing) before turning components off. This allows the System-on macro to be very quick with only power-on commands (eliminating long macro pauses between power-on and input changes). Experienced users can just use the System-on and jump macros for very quick and efficient mode changes. Common receiver and TV functions (Surround mode, channel levels, etc.) have been copied to other devices to all-but eliminate the need to switch devices on the remote. This file is evolving, so I'd love to hear feedback!
Updated: January 18, 2006  Size: 28kb
Bill Spence's MX-700 System
For: HTM MX-700 (System)
By: Bill Spence
Many hard to find discrete codes. I use the mute and prev ch buttons to toggle between my receiver and DVD/TiVo. I also use push and hold macros extensively. My two DSS receivers are next to each other so I have one set for ID 1 and the other to ID 51. I am still looking for a VIDEO 7 discrete for the TV and any Yamaha DSP discretes. Thanks to Greg for doing the hex conversions!
Updated: December 30, 2002  Size: 25kb
Bill Wilson's Home Theater
For: HTM MX-700 (System)
By: Bill Wilson
I have it so that I can control the DSP fuctions of my DSP-A1 and Dolby and DTS setting on each device so that I can switch between them and stereo easily. So I am sure a lot of you will need to erase buttons you don't need but I believe all the nessasary ones are there. I have discrete codes for everything except the Motorola cable box.
Updated: April 28, 2003  Size: 13kb
Brian Steeves' Second System
For: HTM MX-700 (System)
By: Brian Steeves
A full system MXF based around the Onkyo TX-NR807 receiver.
Updated: January 15, 2010  Size: 18kb
More System Files: [ < Back | Next > ]
Return to the Complete System Setup Files index.

Share with the remote control community
by uploading a file to Remote Central!

Hosting Services by ipHouse