The following page was printed from RemoteCentral.com:
This Wiki entry is maintained by Remote Central members - so if you spot an error or have additional information, please update it!
| | Brand: | Onkyo |
Device Type: | Receiver |
Model/Series: | TX-NR1007 |
Model Year: | 2009 |
Information: | [Link: onkyousa.com] |
Configurations: | Search the file area |
| | | | | | Dimensions: | 17.13" wide × 7.81" high × 18.25" deep 43.51 cm × 19.84 cm × 46.36 cm |
| | | | | | Notes: | You can control this via TCP/IP. Here is a helpful link
[Link: avforums.com]
sample string
ISCP\x00\x00\x00\x10\x00\x00\x00\x09\x01\x00\x00\x00!1ZPWQSTN\x0D
\x09 is length of command |
| |
|
|
Input Options
| | Infrared: | Yes |
IR Input Jack: | Yes |
Radio Frequency: | No |
RS-232 (Serial): | Yes |
Network IP: | Yes - Wired |
Bluetooth: | No |
USB: | No |
DC Trigger: | No |
| | | Output Ports
| | IR Output Jack: | No |
RS-232 Output: | No |
DC Trigger: | Yes |
| |
| |
|
Discrete Codes
| |
Power: | Yes |
Inputs: | Yes |
Sound Modes: | Yes |
Picture Modes: | N/A |
Screen Modes: | N/A |
| |
| Delays/Timings
| | Power On: | Unknown |
Switch Inputs: | Unknown |
Inter-command: | Unknown |
| |
|
|
|
Important Codes & Commands |
No codes have been added for this model.
|
|
No files have been uploaded for this model. Use the red Wiki Toolbox below to upload a file! |
|
About this page...
This page contains information on how the Onkyo TX-NR1007 can be controlled, along with useful tips, tricks and commands to make integrating this device into a universal remote control or other control system faster and more reliable.
This entry was last updated on Sunday April 11, 2010 at 20:51 by scottedge267.
|
[Link: sanjanakaur.com]
[Link: sanjanakaur.com]
[Link: sanjanakaur.com]
[Link: sanjanakaur.com]
[Link: sanjanakaur.com]
[Link: sanjanakaur.com]
[Link: sanjanakaur.com]
[Link: sanjanakaur.com]
[Link: sanjanakaur.com]
[Link: sanjanakaur.com]
[Link: sanjanakaur.com]
[Link: sanjanakaur.com]
[Link: sanjanakaur.com]