The following page was printed from RemoteCentral.com:
The following is an archive of information recorded for the Philips 42PF9730A/37 Wiki entry. This version was created by Daniel Tonks on Monday April 27, 2009 at 03:17. (Original Entry)
| | | Brand: | Philips |
| Device Type: | Television |
| Model/Series: | 42PF9730A/37 |
| Model Year: | 2006 |
| Information: | [Link: p4c.philips.com] |
| Configurations: | Search the file area |
| | | | | | | Dimensions: | 9.99" wide × 9.99" high × 4.10" deep 25.37 cm × 25.37 cm × 10.41 cm |
| | | | | | | Notes: | Discrete power and input commands were not full implemented in early firmware versions; ensure you are running the latest from Philips' site.
This set can experience HDMI negotiation issues if the HDMI device is turned on before the TV is ready and displaying an image.
Older firmware had an issue where the set would occasionally fail to negotiate HDCP and would not try again until the set was powered off and left off for 3-4 minutes (until a relay clicked). Newer firmware still has occasional HDCP issues, however the relay now clicks after a few seconds. |
| |
|
|
|
Input Options
| | | Infrared: | Yes
- Parity/Toggle Bits |
| IR Input Jack: | No |
| Radio Frequency: | No |
| RS-232 (Serial): | No |
| Network IP: | No |
| Bluetooth: | No |
| USB: | No |
| DC Trigger: | No |
| | | Output Ports
| | | IR Output Jack: | Yes |
| RS-232 Output: | No |
| DC Trigger: | No |
| |
| |
|
Discrete Codes
| |
| Power: | Yes |
| Inputs: | Yes |
| Sound Modes: | No |
| Picture Modes: | No |
| Screen Modes: | Yes |
| |
| Delays/Timings
| | | Power On: | 9.99 seconds |
| Switch Inputs: | N/A |
| Inter-command: | N/A |
| |
|
|
|
| Important Codes & Commands |
No codes have been added for this model.
|
|
| 
