| Post 1 made on Monday August 10, 2015 at 19:11 |
Louie B. Lurking Member |
Joined:
Posts: | January 2007
3 |
|
|
I have a client that had a Lite Touch Elite lighting system in his house that I was controlling with his Crestron controller via RS232. His Lite Touch controller went bad and the lighting integrator (different company) switched it to A Savant controller (Savant bought out Lite touch but are now discontinuing this product as well).
Now my Crestron will no longer control his lighting so I'm assuming the protocol has changed. Does anyone have a listing for the protocol on the newer Savant lighting controls?
|
|
| Post 2 made on Saturday September 12, 2015 at 10:13 |
Audible Solutions Super Member |
Joined:
Posts: | March 2004
3,246 |
|
|
Not enough information. There was not a single LiteTouch system but, 3 different systems with different protocols. LiteTouch was certainly controllable from Crestron. New lighting contractor might mean a new, different baud rate.
This is an instance where the lighting contractor tells you the baud rate, a telnet login if enabled, and you try different macros, looking for the RX$ line in debugger using each of the different macros.
Alan
|
"This is a Christian Country,Charlie,founded on Christian values...when you can't put a nativiy scene in front fire house at Christmas time in Nacogdoches Township, something's gone terribly wrong" |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
