| Post 1 made on Saturday November 2, 2013 at 09:42 |
Hope someone can help...
I would like to use the serial control on my Philips RFX9600 to control my Meridian 551 amp.
The 551 has the Meridian comms connection (5 pin DIN) and the datasheet specifies it supports RS232, but I can find no information on the pinouts for a DIN - 9 pin D-sub connection. I am at a loss to whether the datasheet is incorrect and the 551 can only be connected to other Meridian equipment.
So first question is, can the comms connection be used for sending RS232 commands from the Philips controller and if so, what should the connection be between DIN and D-sub?
Many thanks.
|
|
| Post 2 made on Wednesday November 6, 2013 at 09:50 |
AVGregg Long Time Member |
Joined:
Posts: | June 2006
314 |
|
|
You can't use the din comms port it is only for meridian comms. There should be a 9 pin serial port on it and you can use the codes from any meridian database they are all the same. If you need to write the strings they are real easy, usually just 2 or 3 characters
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
