Post 1 made on Wednesday February 4, 2009 at 18:48 |
rick12667 Lurking Member |
Joined: Posts: | December 2007 9 |
|
|
Hello,
I am having a problem with a appliance moduler not turning on. Here is what I have set up. I have a macro called power on which controls about seven lights and one appliance. All the lights will come on but the appliance will not. (every time) so I need to manually turn it on with the remote. Now at the end of the night I have a macro that says all power off and when I push this button all my lights go off plus my appliance also goes off every time. Why will is shut off but not turn on?
Thanks Rick
|
|
Post 2 made on Wednesday February 4, 2009 at 21:14 |
Jim Fouch in Southern California Founding Member |
Joined: Posts: | August 2001 117 |
|
|
Are you using separate commands in your macro for each device or an 'all on' [housecode] command? If it is the later that would be your problem as 'all on' commands only turn on light modules and not appliance modules while 'all off' turn off both.
|
Cheers, Jim. |
|
OP | Post 3 made on Thursday February 5, 2009 at 10:26 |
rick12667 Lurking Member |
Joined: Posts: | December 2007 9 |
|
|
Yep that must be the problem. Why would it turn them off but not on? Looks like I will need to set up another entry for the appliance module.
Rick
|
|
Post 4 made on Thursday February 5, 2009 at 14:18 |
Jim Fouch in Southern California Founding Member |
Joined: Posts: | August 2001 117 |
|
|
I think it is a safety feature. Turning on something like a coffee maker in error could cause a major problem.
|
Cheers, Jim. |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.