Post 1 made on Sunday March 28, 2004 at 12:32 |
Williamp Long Time Member |
Joined: Posts: | November 2003 18 |
|
|
OK - so I had my x10/IR543 setup working fine via IR - then I moved and need to run the IR543 via RF from the mrf-200
Not working - the only commands that work are ON and OFF and only about 50% of the time. DIM, ALL-ON, ALL-OFF don't work at all.
And, if I hit the dim button on the IR543 unit, the lights dim down to off, essentially.
I'm confused - I've got the IR543 plugged directly into the wall. The mrf-200 works fine to control all my other devices.
Help.
Thanks!
|
|
OP | Post 2 made on Wednesday March 31, 2004 at 22:48 |
Williamp Long Time Member |
Joined: Posts: | November 2003 18 |
|
|
c'mon people - any help here?
It's getting old having to get off my, er, ya know, and turn the lights off!
|
|
Post 3 made on Thursday April 1, 2004 at 23:07 |
Pete Harrison Founding Member |
Joined: Posts: | December 1999 147 |
|
|
The same thing happened with me and my ir543ah. The way I solved it was with reducing the ir signal coming from the mrf-200. I have a niles repeater system in my system as well so I just dialed down the ir output. You could accomplish the same thing by increasing the distance and/or changing the direction of the ir emitter or the blaster (whichever your using) so it gets a less intense signal. This hopefully will solve your problem.
Pete
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.