|
|
|
Lighting & Home Control Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
av-2000 and controling x-10
| |
|
Topic: | av-2000 and controling x-10 This thread has 14 replies. Displaying all posts. |
|
Post 1 made on Saturday February 28, 2004 at 19:04 |
oldgoat Lurking Member |
Joined: Posts: | February 2004 6 |
|
|
I'm a very new newbie!There are no instructions in the av-2000 instruction book on how to control lights . I have a ir543, lamp module(lm465), and dimmer switch(ws12a). Now what?
|
|
Post 2 made on Thursday March 4, 2004 at 01:49 |
edmund Elite Member |
Joined: Posts: | April 2002 13,859 |
|
|
There are no x10 codes in the av2000, you need another remote to teach the av2000 the commands.
|
|
OP | Post 3 made on Thursday March 4, 2004 at 07:48 |
oldgoat Lurking Member |
Joined: Posts: | February 2004 6 |
|
|
Could you give me an example?
|
|
Post 4 made on Thursday March 4, 2004 at 13:51 |
marainwa Long Time Member |
Joined: Posts: | January 2004 35 |
|
|
I have basically the same setup. Youll need to go to Radio Shack and buy a the 5 in 1 universal remote..model number 15-2115. You need to use the learn feature on the AV3000 to learn some commands from the radio shack remote. Once ur done u can simply return the radio shack remote if you want to.
|
|
OP | Post 5 made on Thursday March 4, 2004 at 19:21 |
oldgoat Lurking Member |
Joined: Posts: | February 2004 6 |
|
|
Thanks very much! I will try that.
|
|
Post 6 made on Thursday March 4, 2004 at 22:16 |
i have the 15-2115.. i didn't think it had x10 commands in it.. how do i get and use themm.. i have an IR543 and some wall switches,,
|
|
Post 7 made on Thursday March 4, 2004 at 22:33 |
marainwa Long Time Member |
Joined: Posts: | January 2004 35 |
|
|
You need to put the aux. code 0167 in the radio shack remote. I know the 15-2103 will work..and im almost positive the 15-2115 will work. When you go to the shack, just look on the back of the remote box and under "home automation" it should say "X10". Anyways, put the code 0167 in the radio shack remote. Then use that to learn the function in the AV3000. when using the radio shack remote, push the number of the device, then channel up to turn it on, and channel down to turn it off. To dim lights push the number of the device, then hold down vol up for dim up, and vol. down for volume down. Hope this helps, let me know if you need more help.
|
|
Post 8 made on Thursday March 4, 2004 at 23:05 |
you are right.. it doesnt say that in the book.. thanks a mill.. I will gunna go buy another remote just for that reason and now i dont have to..
|
|
Post 9 made on Thursday March 4, 2004 at 23:34 |
what about all on and all off commands?
|
|
Post 10 made on Friday March 5, 2004 at 00:07 |
marainwa Long Time Member |
Joined: Posts: | January 2004 35 |
|
|
all off comand is the mute button...im not sure if there is an all on command...but once u program ur AV3000 you can set up a macro on the system buttons to turn any number of devices on or off in any combination.
|
|
Post 11 made on Friday March 5, 2004 at 00:30 |
edmund Elite Member |
Joined: Posts: | April 2002 13,859 |
|
|
DO NOT GET THE 15-2115!!! It's a piece of junk. It doesn't take advanced codes, so you're stuck with whatevers mapped. Get the 2103 or splurge and get the 2116. Theseare the advanced codes available for setup 0167: [Link: hifi-remote.com]
|
|
Post 12 made on Friday March 5, 2004 at 00:38 |
the power is all on and the mute is all off for the 15-2115.. thanks for the link.. it worked...
|
|
OP | Post 13 made on Saturday March 6, 2004 at 10:21 |
oldgoat Lurking Member |
Joined: Posts: | February 2004 6 |
|
|
OK!! I got the 2103 remote,taught my av3000 and everything works(all on/off,dim). Now what? How to do scenes? Macros?
This message was edited by oldgoat on 03/06/04 13:31.
|
|
Post 14 made on Saturday March 6, 2004 at 20:45 |
marainwa Long Time Member |
Joined: Posts: | January 2004 35 |
|
|
glad to hear you got it all working. Now for scenes. The way i have mine set up i can push one button and it will play a DVD..dim the lights...and turn the fireplace on, etc. Its pretty easy...hold the commander off and mute button at the same time. Then push the system button on the LCD screen. Next push what system you want to program..i start out with one of the three system control buttons on the remote buttons. After you push the system button start selecting, in order, what commands you want the remote to do. After the last one push the commander off button. Thats it! Its pretty easy. Let me know if you have any more questions...good luck!
|
|
OP | Post 15 made on Monday March 8, 2004 at 12:33 |
oldgoat Lurking Member |
Joined: Posts: | February 2004 6 |
|
|
That was pretty easy. Thanks.
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|