Post 1 made on Wednesday September 10, 2003 at 14:42 |
lordleon Lurking Member |
Joined: Posts: | September 2003 2 |
|
|
I have pronto remote and I am trying to get it to operate my X-10 stuff I someone could give me a detailed step by step, (from beining to end), on how to do this I would appreciate it
|
|
Post 2 made on Wednesday September 10, 2003 at 17:33 |
Bill E. Founding Member |
Joined: Posts: | July 2001 947 |
|
|
|
Post 3 made on Wednesday September 10, 2003 at 18:32 |
Deane Johnson Founding Member |
Joined: Posts: | August 2001 263 |
|
|
lordleon:
The first thing to understand and accept is that a Pronto will not talk to an X-10 device. Pronto is IR, X-10 is RF.
The Pronto has to talk to a device that receives Pronto's IR output and then talks to the X-10 stuff. Easiest and cheapest thing is the IR543 from the site linked in Bill's post above. A better, but more expensive version is the IR543AH which expands it's capability from one house code to all house codes.
I find HomeAutomationNet.com about the best place to get this stuff, and the best place for good advice.
Deane
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.