| Post 1 made on Sunday August 10, 2003 at 10:57 |
Jimmiec Lurking Member |
Joined:
Posts: | August 2003
6 |
|
|
I want to set up a simple 2 lamp X10 system in a single room. What do I need to be able to use the Pronto TSU2000 to control them? I only have 2 lamp modules, do I need a control console to send TSU2000 commands to??? Thanks
|
|
| Post 2 made on Sunday August 10, 2003 at 12:06 |
Larry in TN Founding Member |
Joined:
Posts: | July 2001
669 |
|
|
|
| OP | Post 3 made on Sunday August 10, 2003 at 23:41 |
Jimmiec Lurking Member |
Joined:
Posts: | August 2003
6 |
|
|
Thanks Larry! Got one on the way. After reading specs of your suggestion, I now understand that Pronto IR must be converted to RF and this will do it...thanks again!
|
|
| Post 4 made on Monday August 11, 2003 at 09:51 |
Larry in TN Founding Member |
Joined:
Posts: | July 2001
669 |
|
|
No, it's not RF, it's X10. The IR543 converts IR commands into X10 commands. There's no RF involved.
|
|
| Post 5 made on Saturday August 23, 2003 at 15:18 |
G50AE Active Member |
Joined:
Posts: | March 2003
747 |
|
|
If you are looking to expand your X-10 system in the future, you might consider the IR-543AH. The differance between it and the basic unit is that it will send commands to All Housecodes where as the basic unit can only use one housecode.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
