Post 1 made on Sunday June 17, 2001 at 23:35 |
Hello every one, I just purchased a Programable control center and timer to control some outside and inside lights, along w/ many other x-10 item's. Anyway here's the problem, my house has an addition to the back side, If I plug the controler into the backside of the house and try to tell it to opperate a light on the front porch it doesnt work but if I plug the controler into an outlet on the front part of the house it works, And same goes if I plug something into the back porch and try to plug controler into the front of the house it will not work but if I plug controler into the back of the house it will work. Any idea's on what I could do to make it work anywhere in the house?? X-10 clames it should work anywhere in any house.. Any Idea's for me. Thank you Brian
|
|
OP | Post 2 made on Sunday June 17, 2001 at 23:39 |
Brain, Sounds very much like a phase coupling problem. Try a passive or active (suggested if home is over 3000sqft) phase coupler. You may need a licensed electrician to install these. [Link: homeautomationnet.com]
|
|
OP | Post 3 made on Monday June 18, 2001 at 00:20 |
mason hatcher Historic Forum Post |
|
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.