Post 1 made on Monday December 19, 2005 at 01:54 |
TraceyD Lurking Member |
Joined: Posts: | December 2005 2 |
|
|
Can anyone tell me exactly how to connect the VPS-1, cm-232, or vps-1, do I connect it to the wall plug?
|
|
Post 2 made on Monday December 19, 2005 at 08:16 |
markrubin Founding Member |
Joined: Posts: | February 2002 919 |
|
|
the CM-232 is the serial communications cable assembly: one end plugs into the RP-6 and the other end to the serial (RS232) port of the component you want to control
the VPS-1 senses voltage (up to 30 volts) from component to give power on or off status: there is a cable that plugs into the RP-6, and another cable for the voltage connection (for example a trigger output): the VPS-1 is powered from the RP-6 and does not require any other connection
each of these come with detailed instructions
|
|
OP | Post 3 made on Tuesday December 20, 2005 at 08:35 |
TraceyD Lurking Member |
Joined: Posts: | December 2005 2 |
|
|
Thank you for the response
|
|
Post 4 made on Thursday December 22, 2005 at 01:29 |
Cougmeister Long Time Member |
|
|
Remember you might need a null modem adaptor between your Receiver and the CM232...depends on the Receiver.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.