Your Universal Remote Control Center
RemoteCentral.com
NEWS
REVIEWS
FEATURES
FILES
FORUMS
RTI Control Systems Forum - View Post
Previous section Next section Up level
Find remotes at:
Amazon.com
What's New
Read more news »
New Reviews
Up level
[ SEARCH ]
[ CONTACT ]
The following page was printed from RemoteCentral.com:

Forums > Professional > RTI Control Systems
RP-6 and CM-232i
Login:
Pass:
Register
 
Forum Search
 
Login

Topic:
RP-6 and CM-232i
This thread has 10 replies. Displaying all posts.
Post 1 made on Sunday September 5, 2004 at 21:01
gages
Founding Member
Joined:
Posts:		March 2002
23
I had an IRF-6 and a CM-232i working fine. Upgraded to the RP-6 and serial commands would not work. Switched to a CM-232 and all works fine.

Anyone have similar experience with CM-232i not working with RP-6?


Steve
Reply
Post 2 made on Tuesday September 7, 2004 at 01:25
RTI Installer
Super Member
Joined:
Posts:		March 2002
3,320
Let me get this straight, you have one of the old 2 part RS232 interfaces? Black cord with what looks like a gray null modem? This was attached to an IRF-6 controlled with a T2 and working fine? However, This did not work with the RP-6 so you switched to one of the newer all black CM232 interfaces controlled by a T2+, and your problem was resolved?
Never Ignore the Obvious -- H. David Gray
Reply
OP | Post 3 made on Tuesday September 7, 2004 at 09:48
gages
Founding Member
Joined:
Posts:		March 2002
23
Yes
Reply
Post 4 made on Saturday September 18, 2004 at 17:38
tjg
Founding Member
Joined:
Posts:		January 2002
5
Having a little trouble getting RS-232 to work with the T2+ and RP-6. No problems whatsover with the T2 and IFR-6. Krell HTS will respond to RS-232 power off/on commands, but it takes a couple of tries. Faroudja NRS will not respond via RS-232. I'm using the new CM232's. Any ideas?

How do you send an IR command from the remote in the middle of a macro with the remaining commands RF?

Thanks.

Tom
Reply
OP | Post 5 made on Saturday September 18, 2004 at 21:55
gages
Founding Member
Joined:
Posts:		March 2002
23
"How do you send an IR command from the remote in the middle of a macro with the remaining commands RF?"

Under button properties set to Standalone
Create the first batch of rf commands (before the IR command) as a system macro and call this macro
Execute the IR command
Create the second batch of rf commands (after the IR command) as a system macro and call this macro


SG
Reply
Post 6 made on Sunday September 19, 2004 at 11:14
tjg
Founding Member
Joined:
Posts:		January 2002
5
SG, thanks. Perfect advice!

Anyone have any ideas on RS232 and Faroudja NRS control? Varied baud rates, still no luck with T2+. Never a problem with the T2.

Rom
Reply
Post 7 made on Monday September 20, 2004 at 11:33
RTI Installer
Super Member
Joined:
Posts:		March 2002
3,320
On 09/19/04 15:14 ET, tjg said...
SG, thanks. Perfect advice!

Anyone have any ideas on RS232 and Faroudja NRS
control? Varied baud rates, still no luck with
T2+. Never a problem with the T2.

Rom

Try using a null modem, between the cm232 and the device in question. Oops, I just noticed that you were able to get it to work with the T2 and IRF-6? did you do an upload to the RP6? Did you try executing the commands with the USB cable disconected from the T2+ and the RP6?
Never Ignore the Obvious -- H. David Gray
Reply
Post 8 made on Tuesday September 21, 2004 at 05:34
tjg
Founding Member
Joined:
Posts:		January 2002
5
Rom, no USB cables were attached.

Tom
Reply
Post 9 made on Monday September 26, 2005 at 14:30
JoeS
Founding Member
Joined:
Posts:		October 2001
76
Can you send me your Krell HTS command for the T2? I'm looking for discrete commands (such as Preamp Power On, Power Off, Zone 2 On, Zone 2 Off)?

Thanks.
Reply
Post 10 made on Tuesday September 27, 2005 at 11:29
select
Founding Member
Joined:
Posts:		January 2002
229
Did you upgrade the firmware on the RP-6?
Reply
Post 11 made on Thursday December 15, 2005 at 19:01
videophreak
Lurking Member
Joined:
Posts:		December 2005
1
OK here is the problem I just was given a RTI T2 remote and I am unable to find the cable or the pin to program this. Does anyone know where I would come across one that would be great. I also have a harmony 6** series and so far its a POS
Reply


Return to thread index...
Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Register for an account

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse