Post 1 made on Wednesday March 12, 2008 at 20:43 |
captra Lurking Member |
Joined: Posts: | November 2004 3 |
|
|
This is my fist time programing a t3. I need to program a light system into it. The light system is centralite. We will be using a 232 module. Any help will be greatly appreciate.
|
|
Post 2 made on Wednesday March 12, 2008 at 23:36 |
Glackowitz RC Moderator |
Joined: Posts: | May 2002 3,793 |
|
|
Are you using a RP-6 or XP-8??
What Centralite system??
Once you see the light you will have no problems with the Centralite...LOL
All you will need to do is connect the 232 to the lighting system(may need a null adaptor) and then add the 232 strings to the buttons on the remote and route to the correct Port the CM232 is pugged into, a little testing and corrections and you should be good to go
let us know what processor you are using and we can continue from there
|
There's no worse feeling than that millisecond you're sure you are going to die after leaning your chair back a little too far. |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.