 |
 |
|
|
RTI Control Systems Forum - View Post
|
|
 |
|
|
|
 |
|
The following page was printed from RemoteCentral.com:
| Topic: | K4 Video Feed This thread has 7 replies. Displaying all posts. |
|
| Post 1 made on Tuesday February 12, 2008 at 23:57 |
SAAudio Advanced Member |
Joined:
Posts: | March 2007
993 |
|
|
Installed a K4 with 1 video feed to it. Every time an IR command is issued from this keypad, the picture fades in and out. Thought maybe it was just fading due to the fact was pushing on the screen, but this was not true. Only fades when it is issuing an IR command.
Any thoughts? Thanks
|
|
| Post 2 made on Wednesday February 13, 2008 at 00:05 |
mrfreeze Long Time Member |
Joined:
Posts: | November 2004
167 |
|
|
I recall reading somewhere(might of been here) about a video issue on the K4.
Might of been that when the IR sensor on the front was disabled the problem went away or it was to do with grounding.
I am only going on memory (I have bad memory :-)), so a search here might turn something up.
|
|
| OP | Post 3 made on Wednesday February 13, 2008 at 00:11 |
SAAudio Advanced Member |
Joined:
Posts: | March 2007
993 |
|
|
Did a few searches earlier.
IR sensor is disabled. Not having bars, picture just fades a bit with every command issued.
Thanks for the reply.
|
|
| Post 4 made on Wednesday February 13, 2008 at 00:13 |
roddymcg Loyal Member |
Joined:
Posts: | September 2003
6,796 |
|
|
Try the ambient light sensor, turning it off I think. I only have the new software on this laptop and I don't have the guts to open working files yet... :)
|
When good enough is not good enough. |
|
| OP | Post 5 made on Wednesday February 13, 2008 at 00:26 |
SAAudio Advanced Member |
Joined:
Posts: | March 2007
993 |
|
|
Tried this too. I currently have the ambient light sensor turned off. At first, I had a slight rolling bar before I turned of the sensor.
My problem is more like a screen fade. As it issues a command, the picture fades a little bit.
|
|
| Post 6 made on Wednesday February 13, 2008 at 05:53 |
Springs Super Member |
Joined:
Posts: | May 2002
3,238 |
|
|
I usually get a flicker as it is transmitting.
|
|
| Post 7 made on Wednesday February 13, 2008 at 20:03 |
cpchillin Select Member |
Joined:
Posts: | September 2007
2,239 |
|
|
For me it all depends on how far the run is. One thing that I thought was great about the K4's video was that you are actually still able to read the guide from a cable box or sat box. If only we could get that on the T4!!!!
|
Who says you can't put 61" plasmas up on cantilever mounts using toggle bolts? <---Thanks Ernie ;) |
|
| Post 8 made on Wednesday February 13, 2008 at 21:37 |
AndyM Founding Member |
Joined:
Posts: | March 2002
1,470 |
|
|
How long is your power feed? Are you using the correct power supply?
Could the keypad be under powered and fading when you put any extra strain on it?
|
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|
|
