Post 1 made on Monday December 25, 2000 at 07:31 |
Jose Valls Historic Forum Post |
|
|
Can we see the Hex code from Pronto and copy and paste to T2? The actual RC5 does not work, does somebody knows how to access to the Hex data bese from pronto edit for the RC5 codes?
|
|
OP | Post 2 made on Monday December 25, 2000 at 10:37 |
Bill E Historic Forum Post |
|
|
Jose, If you open up the device in the pronto edit program, double click on the device button you are interested in getting the hex data for. This opens a "button properties" window, which has a tab called "action". Double click on the code in the "action" window, it then opens a window called "add IR" which has an option "view IR” when clicked on it displays the hex data. Bill www.homeautomationnet.com
|
|
OP | Post 3 made on Monday December 25, 2000 at 13:47 |
Jose Valls Historic Forum Post |
|
|
That's not the hex code for the RC-5 . It is just a call to an internal database where reside the Rc-5. The code that you get from an Rc-5 command can not be copy to the T2 database.
|
|
OP | Post 4 made on Monday December 25, 2000 at 18:39 |
Daniel Tonks Historic Forum Post |
|
|
There's nothing you can do directly with RC5/6 hex codes and the RTI. If you happen to try and LEARN RC5/6 codes on the Pronto -- and the code comes out dirty, meaning the Pronto doesn't recognize it as a proper RC5 code but instead stores it as normal hex -- that that resulting code would work on the RTI.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.