Has anyone had the problem of macro chanel changing not working from the upper screen, yet the lower numeric buttons will work fine for the same device on the same page? I am not using chanel wizard in this instance. Am I overlooking something? Both sections were "taught" from the same library remote. Thanks for any ideas.
rick

What do you have the number of repeats set to in the macros?

Vinny

One.

Vinny,
You are so subtle. Increasing the repeats did the trick. Thanks alot!
Now I am having trouble getting the display to do macros. I am beginning to wonder if I am doing them right, or that they were only intended for buttons.
If I can use the example from the manual on the bottom of page 39, for -double click- to send two diferent commands, can I fill in the line below ELSE with another command so that one click does the line after ELSE, double click does the line above ELSE?
Also, to add a page jump from the macro list, would I place that icon outside the diagram lines of the button test? I have not been able to get any of this to work.
Please!
rick
Thanks
rick

Rick,

Yes on the first question, you can send whatever you fancy above and below the ELSE line. On the second quesion: possible, but not required.

Example:

? If Button is held down for 1.0 seconds then
| - Denon/Receiver Input

Oops...wrong button - got a little clicker-happy :-)

Example:

? If Button is held down for 1.0 seconds then

- Else

-----------------------------

This will give you the same result:

? If Button is held down for 1.0 seconds then

- Else
|
-----------------------------
Change to Page: Tuner