| Post 1 made on Saturday September 12, 2009 at 17:54 |
maussimo010 Long Time Member |
Joined:
Posts: | November 2008
12 |
|
|
I have a Slingbox Pro, and also a fairly new Dvico Tvix 6500a...
in the downloads section here at RC, there is an .rcf file for the Tvix remote commands...BUT...the sling requires a .bin file to upload codes into it via the slingplayer file...
I don't know how to say this correctly, but is there a way to create a .bin file FROM the .rcf file so that I can control the Tvix THROUGH the sling?
any questions or if more info is needed, PLEASE let me know!
|
|
| Post 2 made on Wednesday December 30, 2009 at 15:49 |
wjmontague Lurking Member |
Joined:
Posts: | December 2009
1 |
|
|
I have the same question with a little more detail. After unzipping a .rcf file into a ConfigEdit.XML file is there a way to use the XML data to program code using RemoteMaster (a sling editor) which then in turn can produce a bin file for slingbox download?
|
|
| Post 3 made on Thursday December 31, 2009 at 23:22 |
anyhomeneeds Super Member |
Joined:
Posts: | December 2007
4,149 |
|
|
Slingbox is still around?
|
"You can't fix stupid." |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
