Post 1 made on Friday August 17, 2001 at 18:17 |
Fred Paul Historic Forum Post |
|
|
Does anyone know whether the Zantech ZPR68-10 can be used to distribute component video, i.e. Y conected to the video port and Pb and Pr connected to the audio ports of a zone?
Thanks
|
|
Post 2 made on Monday September 17, 2001 at 10:14 |
CDuncan Founding Member |
Joined: Posts: | September 2001 1 |
|
|
I wouldn't try passing video signals through the audio ports on the ZPR, they are volume controlled and the levels could damage your video inputs on the remote device. If you're not using all six zones and all eight sources you could devote three to each and write IR macros that switch all three inputs to the respective three zones at once. I've experienced better results by directly connecting the composite video to my projector and using the ZPR only for RCA inputs. You can then modulate the RCAs into Coax (and affordably) distribute the video to each zone. The quality is not as good as composite on the remote TVs, but there is little difference in the picture on my projector using composites versus a 60" big screen being fed DVD signals out of RCA jacks, through the ZPR then modulated to COAX. If you try using three zones and three inputs, let me know how it works...
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.