Your Universal Remote Control Center
RemoteCentral.com
Audio, Receivers & Speakers Forum - View Post
Previous section Next section Previous page Next page Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Page 2 of 2
Topic:
if a tv has component inputs, can it put out an hdtv signal
This thread has 19 replies. Displaying posts 16 through 20.
OP | Post 16 made on Monday July 30, 2001 at 12:50
Mike Riley
Historic Forum Post
Mad: Your set is not HD-ready (just the type of comb filter it uses is an indication of that), but you will get some pretty good looking pictures nonetheless, due to both the component input capability and the higher resolution the set is capable of.
OP | Post 17 made on Monday July 30, 2001 at 22:17
GregoriusM
Historic Forum Post
You still won't be able to send it a progressive signal. Interlaced only.
OP | Post 18 made on Monday July 30, 2001 at 23:43
Mike Riley
Historic Forum Post
... wait a minute... Did I mention you won't be able to get a progressive signal? Only interlaced...
OP | Post 19 made on Tuesday July 31, 2001 at 16:20
Robert
Historic Forum Post
if it says 1080i or 720p above the input it is...and it would probably say hdtv or dtv on the front of the tv.......robert
OP | Post 20 made on Wednesday August 1, 2001 at 20:32
abmarsh
Historic Forum Post
I don't know either, but if you connect with www.avsforum.com you will find some VERY knowledgeable help.
Bill
Page 2 of 2


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse