Your Universal Remote Control Center
RemoteCentral.com
General Consumer Remotes Forum - View Post
Previous section Next section Previous page Next page Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Page 2 of 7
Topic:
Living Solutions (or Innovage) jumbo universal remote codes
This thread has 101 replies. Displaying posts 16 through 30.
Post 16 made on Sunday June 10, 2007 at 20:08
mel1307
Lurking Member
Joined:
Posts:
June 2007
2
I also have the Living Solution Jumbo Remote with out the code search. I found a way to program though here are the instructions:

Hold the device button you want to program for 3 seconds & release.
Push & release the power button & the red light will remain lit.
Push the CHANNEL UP button over & over slowly until the device turns off.
When device turns off press OK button.

Your done!!!

Let me know if it works!!!!
Mel
Post 17 made on Sunday June 10, 2007 at 20:12
mel1307
Lurking Member
Joined:
Posts:
June 2007
2
I also have the Living Solution Jumbo Remote with out the code search. I found a way to program though here are the instructions:

Hold the device button you want to program for 3 seconds & release.
Push & release the power button & the red light will remain lit.
Push the CHANNEL UP button over & over slowly until the device turns off.
When device turns off press OK button.

Your done!!!

Let me know if it works!!!!
Mel
Post 18 made on Monday June 11, 2007 at 14:11
eronstuc
Lurking Member
Joined:
Posts:
June 2007
1
I have the manual for this Innovage Jumbo Universal Remote. There is no listing in the Cable section for Motorola, nor is there a listing for Innovative Design. (Hope that is correct as the text of the message dissapears once I began to reply.

I lost the manual for the living Solutions So I bought the Innovage model hopping that the manual would result in getting the numbers. I have my TV, VCR, and DVD codes for all the set ups in the house but the numbers for the INNOVAGE are not the same as those for the living Solutions.
Regards,

Gary
Post 19 made on Monday June 11, 2007 at 19:32
skrunchi
Lurking Member
Joined:
Posts:
June 2007
1
I need codes for a Sony TV and Scientific Atlanta Cable Box, HELP!
Sony Big Screen
Scietific Atlantic Cable Box
Post 20 made on Sunday June 17, 2007 at 23:00
RoseMartland
Lurking Member
Joined:
Posts:
June 2007
5
Sony: 002 006 071 128
SA Cable: 006 036 037 038 075 136 147

Anyone know the re-map codes for this remote? I'd like to use the cable device key for my second VCR.
Post 21 made on Monday June 18, 2007 at 01:17
cls
Lurking Member
Joined:
Posts:
June 2007
8
Brookstone/OSIM-branded product with manual pdf download available...

[Link: brookstone.com]

Hope this helps!
Post 22 made on Monday June 18, 2007 at 14:00
KBRRRanch
Lurking Member
Joined:
Posts:
June 2007
1
I have the same prob with the samsung dvd home theatre. 182 and 230 will not work. What did you finally do to make yours work?? I have the Innovage Jumbo Universal Remote.Everything else programed into it fine. just not the Samsung DVD player. Thank you
Post 23 made on Wednesday June 20, 2007 at 04:29
jalex2769
Lurking Member
Joined:
Posts:
June 2007
1
Thank you so much for the information to program my living solutions universal remote without the codes manual. It worked great! Jerry
Post 24 made on Sunday June 24, 2007 at 22:07
amarie3d
Lurking Member
Joined:
Posts:
June 2007
2
sorry, moving my post...didnt mean to post in wrong place..I'm a newbie, please forgive me lol

Last edited by amarie3d on June 24, 2007 22:13.
Post 25 made on Monday June 25, 2007 at 21:15
ganniejan3
Lurking Member
Joined:
Posts:
June 2007
1
My daughter gave her daddy a Innovage jumbo remote for Fathers Day but the codes for Dish Network do not work...Anyone have any suggestions?
Post 26 made on Tuesday July 10, 2007 at 22:38
bingotheclown
Lurking Member
Joined:
Posts:
July 2007
1
On March 25, 2007 at 05:05, jafairfax said...
I need help. My husband just bought a Innovage jumbo remote
and he was entering the codes when the TV just turned
off and we can't turn it back on. Its on standby but the
LED on the TV is blinking and the LED on the Innovage
remote is blinking also.

We can't seem to reset it. We've turned the TV off from
the mains. It hasn't worked. We've taken the batteries
out from the remote. It hasn't worked.

Please help!!!!

Frustrated remote control user, Jasmine
Post 27 made on Tuesday July 10, 2007 at 23:57
woopop
Lurking Member
Joined:
Posts:
July 2007
2
Hi.

Has anyone been able to get this remote to work with the DVR functions on a Scientific Atlanta Explorer 8300 HD cable box? I was able to get the general channel up/down and guide working, but no go on the dvr, which really sucks!!!

Any help would be greatly appriciated :)
Post 28 made on Thursday July 12, 2007 at 22:17
lindacdb
Lurking Member
Joined:
Posts:
July 2007
2
I tried this and the red light doesn't come on. Now what?
Linda
Post 29 made on Friday July 13, 2007 at 12:31
woopop
Lurking Member
Joined:
Posts:
July 2007
2
did you check the batteries? Occams Razor.....
Post 30 made on Sunday July 15, 2007 at 14:26
hrman50
Lurking Member
Joined:
Posts:
July 2007
1
Jasmine,

Did you ever get your TV back on and the remote reprogrammed? Our TV is out also.
Don Evans
Find in this thread:
Page 2 of 7


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse