| Post 1 made on Sunday August 3, 2003 at 18:26 |
Miru Lurking Member |
Joined:
Posts: | August 2003
3 |
|
|
... after my 11 month old daughter has thrown the TakeControl very hard to ground.
Hallo,
on the mainboard a component has dropped. Somebody can say to me in which direction this component "[M]12.0T" must be soldered? [M] in direction Send-IR-LEDs or to the Receive-IR-LED?
I could send a JPG of the mainboard and this component ...
Many greets
Michael
|
|
| OP | Post 2 made on Wednesday August 6, 2003 at 18:47 |
Miru Lurking Member |
Joined:
Posts: | August 2003
3 |
|
|
Hello,
how could I include an image-jpg here to show my problem?
Regards Michael
|
|
| Post 3 made on Friday August 8, 2003 at 11:52 |
Anthony Ultimate Member |
Joined:
Posts: | May 2001
28,878 |
|
|
you can only link to an image that is hosted on an other site. for instance  by writting < img src="">
|
... |
|
| OP | Post 4 made on Monday August 11, 2003 at 02:43 |
Miru Lurking Member |
Joined:
Posts: | August 2003
3 |
|
|
Thank you Anthony  My problem is that I don't know in which direction this component "[M]12.0T" must be soldered. Could anybody help me? Thanx Michael
|
|
| Post 5 made on Friday August 29, 2003 at 02:22 |
blackheart42 Lurking Member |
|
|
"X" as in "X2" typically refers to a crystal which isn't polarity sensitive. Also, there's no obvious polarity marks on either the board or the component. I don't think it matters which way you solder it on.
Blackheart42
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
