|
|
|
General Consumer Remotes Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
Universal Remote & 3M MP8650 Projector
| |
|
Topic: | Universal Remote & 3M MP8650 Projector This thread has 5 replies. Displaying all posts. |
|
Post 1 made on Monday November 1, 2004 at 10:56 |
jtandrews Lurking Member |
Joined: Posts: | November 2004 2 |
|
|
I recently found a 3M MP8650 projector in a dumpster and when I took it home, to my surprise it still worked, however the convergence is slightly off and i'd like to reset it, but unfortunately the only way to do this is with a remote, which I do not have. I have 2 universal remotes, both RadioShack - 5-in-1 Smart Remote Control 15-2103, and a 6-in-1 Kameleon. I don't see any codes for 3m in either of the manuals and when I try to use the automatic code finding features, it doesn't work. Does anyone have any suggestions on how I could get one of the remotes to work with the projector? Or possibly another universal that would work or even a place to buy the original 3m remote? Any input would be appreciated, thanks.
|
|
Post 2 made on Monday November 1, 2004 at 14:05 |
The Robman Loyal Member |
Joined: Posts: | August 2001 6,218 |
|
|
You should be able to use TV/0145 for this. Power and volume are covered by the built in buttons, arrow up/down should work the zoom, and arrow left/right should work the focus.
In addition, you can use these advanced codes to program the remaining functions:
123 RGB 213 VIDEO 023 Blank Screen 165 Reset / Right Mouse 043 Timer 038 Arrow Up 107 Arrow Down 228 Arrow Right 232 Arrow Left 234 ok 196 Magnify Off 200 Magnify+ 198 Magnify- 075 Menu 205 Mouse Up 209 Mouse Right 207 Mouse Down 211 Mouse Left
|
|
|
OP | Post 3 made on Monday November 1, 2004 at 16:17 |
jtandrews Lurking Member |
Joined: Posts: | November 2004 2 |
|
|
I gave this a try, using the 0145 code on each of the two remotes i have and it doesn't seem to be working. Any other ideas? Also how do you program advanced codes like the ones you listed? Thanks.
|
|
Post 4 made on Tuesday November 2, 2004 at 10:11 |
The Robman Loyal Member |
Joined: Posts: | August 2001 6,218 |
|
|
The codes I posted were for models MP8630 and MP8725, so I'd be surprised if your MP8650 uses a different code set. I have confirmed that the TV/0145 code is in both the 15-2103 and 15-2133 remotes, so if you correctly programmed that code and got no reponse when you tried the POWER button, I suspect that the infrared receiver in the projector is broken.
As for your other question, go to the "advanced code" section of my web site for more info.
|
|
|
Post 5 made on Monday November 8, 2004 at 17:32 |
Neilw Lurking Member |
Joined: Posts: | November 2004 2 |
|
|
Hi ,I have one of these projectors and also have no remote. This projector has different codes to the MP 8630 as the remote functions in a different way. You select the function with one button then increase or decrease its adjustment with the arrow keys. Not individual up and down keys for each function. Not all 3M projectors were manufactured by the same company. The cct boards in the MP8650 are manufactured by fujitsu. I am looking for these codes also so I hope someone can come up with an answer. Neilw
|
|
Post 6 made on Wednesday November 10, 2004 at 13:53 |
The Robman Loyal Member |
Joined: Posts: | August 2001 6,218 |
|
|
I have found the codes for this model. It uses the Sharp protocol with a device code of 13, which matches three One For All/Radio Shack TV codes: 0220,0491,0851
Unfortunately, those codes are in very few remotes, so you'll need to get them loaded via an upgrade. I don't know if the button codes for any of those codes match the 3M though, so if you do get them loaded and they don't seem to work, try these advanced codes:
126 BLACK SCREEN 204 CHECK 199 CURSOR DOWN 098 CURSOR LEFT 157 CURSOR RIGHT 203 CURSOR UP 047 DATA1 049 DATA2 093 ENTER 132 LENS 027 MENU 077 MUTE 073 OFF 097 ON 048 VIDEO1 044 VIDEO2 079 VOL DOWN 083 VOL UP
|
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|