Hey everyone,

hopefully someone has an answer for my problem

Just been learning codes in from the above Austar pay tv box(Australian) into a pronto.

Direction left, up and down learn in and work perfectly. However Left and the select button learn in but dont work at all. The codes for left and select are actually two sets of 4 numbers shorter than the other codes mentioned.

Below are the codes for all of the above mentioed functions. If any australian installers have figured out a fix to this problem id love to get your answers.

Left

0000 0073 0000 0012 000F 000A 0006 000A 0006 0016 0006 000A 0006 000A 0006 001C 0006 0016 0006 000A 0006 000A 0006 0016 0006 0016 0006 0010 0006 0016 0006 0010 0006 0010 0006 0016 0006 0016 0006 0CAC

Down

0000 0073 0000 0012 000F 000A 0006 000A 0006 0016 0006 000A 0006 000A 0006 001C 0006 0016 0006 000A 0006 000A 0006 0016 0006 0016 0006 0010 0006 0016 0006 0010 0006 0010 0006 0016 0006 0010 0006 0CAC

Up

0000 0073 0000 0012 000F 000A 0006 000A 0006 0016 0006 000A 0006 000A 0006 001C 0006 0016 0006 000A 0006 000A 0006 0016 0006 0016 0006 0010 0006 0016 0006 0010 0006 0010 0006 0016 0006 000A 0006 0CAC


The codes below DONT work

Right

0000 0073 0000 0011 000F 000A 0006 0016 0006 000A 0006 000A 0006 001D 0006 0016 0006 000A 0006 000A 0006 0016 0006 0016 0006 0010 0006 0016 0006 0010 0006 0010 0006 0016 0006 001D 0006 0CAC

Select

0000 0073 0000 0011 000F 000A 0006 0016 0006 000A 0006 000A 0006 001C 0006 0016 0006 000A 0006 000A 0006 000A 0006 0016 0006 0010 0006 0016 0006 0010 0006 0010 0006 001C 0006 000A 0006 0CAC




Any help would be greatly appreciated

Regards,

Dallas

I'm having the same but also the colour buttons and the #7 don't work do they work for you???

Hey Dave

I know for a fact that the colours work (ill post them below for you)

Red

0000 0073 0000 0012 000F 000A 0006 000A 0006 0016 0006 000A 0006 000A 0005 001D 0006 0016 0006 000A 0006 000A 0006 0016 0006 0016 0006 0010 0006 0016 0006 0010 0006 0016 0005 001D 0006 0010 0006 0CFD

Green

0000 0072 0000 0012 000F 000A 0006 000A 0006 0016 0006 000A 0006 000A 0006 001C 0006 0016 0006 000A 0006 000A 0006 000A 0006 0016 0006 0010 0006 0016 0006 0010 0006 0016 0006 001C 0006 0016 0006 0D1F

Yellow

0000 0072 0000 0012 000F 000A 0006 000A 0006 0016 0006 000A 0006 000A 0006 001C 0006 0016 0006 000A 0006 000A 0006 000A 0006 0016 0005 0011 0006 0016 0005 0011 0006 0016 0006 001C 0006 001C 0006 0D1F

Blue

0000 0073 0000 0012 000F 000A 0006 000A 0005 0017 0006 000A 0006 000A 0006 001C 0005 0017 0006 000A 0006 000A 0005 0017 0005 0017 0006 0010 0005 0017 0006 0010 0006 001C 0006 000A 0006 000A 0006 0CFD

I had a look over the codes i had for the austar box and i noticed my '7' button is short two batches of 4 numbers too, however im certain i tested it and it worked. Ill add it below so you can see if its any different to yours

7

0000 0073 0000 0011 000F 000A 0006 0016 0006 000A 0006 000A 0006 001C 0006 0016 0006 000A 0006 000A 0006 000A 0006 0016 0006 0010 0006 0016 0006 000A 0006 000A 0006 0010 0006 001C 0006 0CAC



Also on a side not if tried running the codes through IR Tool and the Up, Down, Left codes all come up with the same 3 nokia 'blocks' making up the entire code. However the Right button only brings up 2 nokia 'blocks' in IR Tool.

Ive tried to learn what i can to completely understand the valuable tools everyone puts up on this site. However this one has completely stumped me

Sorry I didn't notice this thread on Friday.


Good observation, and that is the reason they don't work.

I think this problem is caused by the connection between the Pronto and the PC during learning. If you learn on the Pronto without the PC connected, that problem shouldn't happen.

But usually you can just edit the bad learn: Change the 0011 to 0012 in the header, then compare a good learn to the bad one to find where the missing pair goes and insert it.

Right:
0000 0073 0000 0012 000F 000A 0006 000A 0006 0016 0006 000A 0006 000A 0006 001D 0006 0016 0006 000A 0006 000A 0006 0016 0006 0016 0006 0010 0006 0016 0006 0010 0006 0010 0006 0016 0006 001D 0006 0CAC

Select:

0000 0073 0000 0012 000F 000A 0006 000A 0006 0016 0006 000A 0006 000A 0006 001C 0006 0016 0006 000A 0006 000A 0006 000A 0006 0016 0006 0010 0006 0016 0006 0010 0006 0010 0006 001C 0006 000A 0006 0CAC

Test again. I'm pretty sure it wouldn't work.

It should be:
0000 0073 0000 0012 000F 000A 0006 000A 0006 0016 0006 000A 0006 000A 0006 001C 0006 0016 0006 000A 0006 000A 0006 000A 0006 0016 0006 0010 0006 0016 0006 000A 0006 000A 0006 0010 0006 001C 0006 0CAC


That result is from an obsolete version of DecodeIr.dll. You'll get much better results from a newer version:

[Link: john.fine.home.comcast.net]


If you still have questions about that after trying with the newer DecodeIr.dll, ask.

thanks they all the codes you gave me now work.

But I also tried the info button and it is the same a '7' button missing some blocks of numbers

info button code

0000 0073 0000 0011 000F 000A 0006 0016 0006 000A 0006 000A 0006 001C 0006 0016 0006 000A 0006 000A 0006 000A 0006 0016 0006 0010 0006 0016 0006 001C 0006 001C 0006 0010 0006 0010 0006 0CAC,

has any one got the right code?

Or does any one have a full set that works and can past on to us.

Sorry for the thread jack.

Dave

John you are a dead set legend

you saved me from having to go for another drive out to bum f#$k nowhere

I think the corrected code is

0000 0073 0000 0012 000F 000A 0006 000A 0006 0016 0006 000A 0006 000A 0006 001C 0006 0016 0006 000A 0006 000A 0006 000A 0006 0016 0006 0010 0006 0016 0006 001C 0006 001C 0006 0010 0006 0010 0006 0CAC

Thanks John

I'll try it and get back to you