 |
 |
|
|
Philips Pronto NG Family Forum - View Post
|
|
 |
|
|
|
 |
|
The following page was printed from RemoteCentral.com:
|
Sony learned code work with Pronto+PC...
| |
|
| Topic: | Sony learned code work with Pronto+PC but not with Pronto alone This thread has 4 replies. Displaying all posts. |
|
| Post 1 made on Thursday October 4, 2007 at 11:25 |
lilian69 Long Time Member |
Joined:
Posts: | February 2006
15 |
|
|
Hi,
I learned Sony code for my camcorder (Sony DCR-HC32) with the Pronto connected to my PC (with ProntoEdit).
When I use the function "Test IR" from ProntoEdit, learned code are Ok, I can control the camcorder perfectly.
But when I use the Pronto alone, nothing happens (for all the codes) !
It's the first time I see that.
I use my Pronto NG TSU3000 since two years, with many different machine and sometimes this forum helped me to do that correctly ;-)
Here is for example the good learned code for the Play function :
0000 0066 0000 000D 0062 0017 0019 0017 0031 0017 0019 0017 0031 0017 0031 0017 0019 0017 0019 0017 0031 0017 0031 0017 0031 0017 0019 0017 0019 03D2
Any ideas please ?
Thank you.
|
Pronto NG TSU3000 |
|
| Post 2 made on Thursday October 4, 2007 at 12:01 |
johnsfine IR Expert |
Joined:
Posts: | September 2002
5,159 |
|
|
Check the RF tab to make sure you haven't disabled IR.
The learned signal you posted is fine.
|
|
| Post 3 made on Thursday October 4, 2007 at 17:23 |
Peter Dewildt Loyal Member |
Joined:
Posts: | July 2001
6,307 |
|
|
It is likely that you need to adjust the Duration.
|
Peter
Pronto 1000 (retired), Pronto TSU7000, RFX6000 (retired)
Pronto 2xTSU9600, RFX9400 |
|
| Post 4 made on Thursday October 4, 2007 at 20:04 |
Lyndel McGee RC Moderator |
Joined:
Posts: | August 2001
13,003 |
|
|
Change the duration of these codes to 0.3s and you see them start to work.
|
Lyndel McGee
Philips Pronto Addict/Beta Tester
|
|
| OP | Post 5 made on Tuesday October 9, 2007 at 08:34 |
lilian69 Long Time Member |
Joined:
Posts: | February 2006
15 |
|
|
Hi,
Well, I don't know why I thought that it was a difficult problem, so I didnt' even try basic things :(
Works correctly now.
Sorry for your time and thank you for your response.
Regards.
|
Pronto NG TSU3000 |
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|
|
