| Post 1 made on Monday September 10, 2007 at 15:08 |
Minstrel Long Time Member |
Joined:
Posts: | September 2004
20 |
|
|
Hi!
I'm having a weird problem and I wonder if you guys could help me.
I'm trying to control a Sanyo PLV-Z4 projector using a TSU3500 and it works
fine through IR, but when I set it to work through RF using RFX6500 the
projector won't turn on!
The weird part is that everything works through RF when the projector is already turned on (including the power button). It just happens when it is OFF and I want to turn it On
through RF.
Thank you!
|
|
| Post 2 made on Monday September 10, 2007 at 17:02 |
Peter Dewildt Loyal Member |
Joined:
Posts: | July 2001
6,307 |
|
|
Try adjusting the duration of the code.
|
Peter
Pronto 1000 (retired), Pronto TSU7000, RFX6000 (retired)
Pronto 2xTSU9600, RFX9400 |
|
| Post 3 made on Monday September 10, 2007 at 19:21 |
Find another place for your RFX6500.
Sanyo's Z-Series projector do respond very lame on direct IR Signals. Though they work very well when the IR signal is sent indirectly by aiming to a wall or something else.
Even the original remote must be held directly in front of the beamer, when aiming directly to it.
And yes, this strange behaviour is only for the On/Off Button.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
