Post 1 made on Thursday August 30, 2007 at 12:55 |
liam_b Lurking Member |
Joined: Posts: | September 2003 4 |
|
|
hi guys
Recently I've noticed that my RU990 resets itself occasionally when picked up, I've tried but can't seem to find any pattern to it.
I've tried what Philips support recommended, updating the firmware, resetting the unit and redownloading the PCF but it's still happening. I even tried creating a very simple PCF from scratch to rule out the possibility that imported 'rubbish' was causing a problem.
Is this a known problem? Or is my unit likely to be faulty?
|
|
Post 2 made on Thursday August 30, 2007 at 22:39 |
Daniel Tonks Wrangler of Remotes |
Joined: Posts: | October 1998 28,780 |
|
|
Have you tried disabling the pickup sensor?
Perhaps a failing battery or loose connection?
|
|
OP | Post 3 made on Sunday September 2, 2007 at 15:03 |
liam_b Lurking Member |
Joined: Posts: | September 2003 4 |
|
|
Hi Daniel,
I don't want to disable the pickup sensor because I like having the backlight come on when people use the remote.
I don't think it's a loose connection from the battery pack into the pronto but it could be problem within the battery pack or perhaps the pack is just getting tired, I'll replacing it and see what happens.
|
|
Post 4 made on Sunday September 2, 2007 at 16:45 |
Lyndel McGee RC Moderator |
Joined: Posts: | August 2001 12,999 |
|
|
If you don't like any of the above answers, then reflash the firware and see if the problem still occurs....
|
Lyndel McGee Philips Pronto Addict/Beta Tester
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.