| Post 1 made on Sunday August 12, 2007 at 22:05 |
I have managed to learn the remotes ir codes after several hassles. I would like to know if you can make discrete on off as it is an older satellite set top box, I have seen posts about homecast making the same box and force, but haven't proved that yet.
The codes I have so far are:
On/Off
900A 0068 0000 0001 12ED 0FF0
1
900A 006D 0000 0001 12ED 00FF
2
900A 006D 0000 0001 12ED 01FE
Exit
900A 006D 0000 0001 12ED 0EF1
etc, I can post more if needed.
Can anyone help with device number protocol etc so I can try makehex or similar
|
|
| Post 2 made on Monday August 13, 2007 at 07:52 |
johnsfine IR Expert |
Joined:
Posts: | September 2002
5,159 |
|
|
For MakeHex, use nec1.irp with Device=18
Function 15 in the MakeHex output should be the On/Off toggle (so you can test one button to verify that you used MakeHex correctly).
I have no guess which functions might by discrete On and Off if they exist at all.
|
|
| OP | Post 3 made on Monday August 13, 2007 at 20:08 |
Thanks, I spoke to Qualifi who marketed the Force range of boxes, they said that it was their implementation of the discrete on off that only exist on Force branded boxes, not homecast or eM Tech models (they are all clones) Will give it a try though.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
