| Post 1 made on Saturday March 11, 2006 at 20:16 |
crombenevolant Lurking Member |
|
|
I am new to the TSU7000 having just traded up from my old RC5000. The one thing I have been unable to get working correctly is the volume hard buttons. I have linked them and they work, but only in single increments. I want to be able to hold down the volume button and have it continually raise or lower. It just automatically worked that way on the rc5000, but I can't seem to find how to do it on the 7000. Any help would be much appreciated.
Justin
|
|
| Post 2 made on Sunday March 12, 2006 at 08:46 |
411avatar Long Time Member |
Joined:
Posts: | October 2003
149 |
|
|
You might try a forum search: +volume +continuous
|
|
| Post 3 made on Sunday March 12, 2006 at 09:21 |
NoahD Long Time Member |
Joined:
Posts: | March 2006
18 |
|
|
I had this problem recently with a device. In my case it took learning several times to get it to go.
When learning try holding the volume key down on the OEM remote until the pronto beeps saying it learned it. That's what did it for me.
|
|
| Post 4 made on Sunday March 12, 2006 at 10:38 |
mburwen Founding Member |
Joined:
Posts: | August 2001
1,185 |
|
|
That shouldn't happen if you have the correct codes. Try copying over the codes from your old device. If that doesn't work, see if you can find the codes listed here on Remote Central on one of the 3000/7000 pcfs. If that doesn't work, try relearning as suggested.
|
|
| OP | Post 5 made on Sunday March 12, 2006 at 10:55 |
crombenevolant Lurking Member |
|
|
Re-learning the code did the trick. That was very strange. Thanks for all of the help.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
