On March 12, 2006 at 07:33, richardstrudwick said...
I have generated codes 0-255 in makehex but I
was not sure how to get it to generate exactly
the right codes. (I was rather hoping for help
in response to my post in "Panasonic LCD screens"
I didn't realize this thread was about Panasonic. Panasonic uses ultiple subdevice numbers for a single real device, so you would need more than one set of 256 codes to really search, and you need to make sure the subdevice number is right when testing the corresponding codes, as described above.
Also lots of people have done the full search already, so you're more likely to find your answer with a forum search than by redoing all the work.
So what I did was use Notepad to replace
all the numbers that I knew were wrong. i.e. 0040
into 0041 .
Waste of time. The 0040 and 0041 are equally correct. Those numbers are approximate durations. There is no way to learn or reproduce the exact duration of each pulse of the original remote. The TV won't care about duration differences even much larger than 0040 vs. 0041.
I have spent some time trying to work out how
to configure the .irp file, but if you could help
me out with the .irp file as per the thread above
then I would be very gratefull.
All you need to change in the .irp file is the device line.