HELP! We have a client who just added an VIP211 high-def box with 5.3 IR remote. Learned codes seem to work fine during testing but don't work upon downloading to TSU3000 w/RFX6000. Pre-programmed codes found in the newest ProntoEdit NG release database, such as digits, also work fine in test mode, but after downloading are acting like toggle-bit, working only every second button press.

Does anyone have IR codes that work this box, or am I chasing the wrong problem?

Thanks!

I have the 411, which basically the same receiver and use the TSU3000 w/o any problems. I can e-mail you the configuration file I use and you can take the codes from there. I have codes for the following commands:

Power
Power On
Power Off
Cancel
Guide
Recall
View
dish
0 thru 9
Format
Search
Page Up
Page Down
Menu
Info
OK
Up, Down, Left, Right

Suppafreak,

Thanks for the offer. I emailed you privately and would appreciate the codes.

karl@blue-kangaroo.biz

Cheers.

Blueroo

Now if you only had the discrete for the "dot" or "dash" for the OTA subchannels, that would be great.

Set a macro sequence to enter the channel number including the sub like this for our local 8.2:

0, 0, 8, 2, ENTER