I can not get my TSU 7000 to learn the codes for fast forward and rewind from the remote that comes with the Sirius Sportster Replay.
I have all updated firmware and software on my TSU 7000.

Does anyone know the codes for those buttons?

I have been able to get the remote to learn every other code from the Sirius remote and though it says it learns the code for FF and REW, it never works. The sirius remote does work however so I know I dont have anything faulty from Sirius.
Any help would be great.

Thank you,

Bob

Bob, is this a typo? I sure hope so.

Please post one IR data for one code that does work and one that does not.

Thanks

This code works which is for "Play"
900A 006D 0000 0001 01FE 0BF4

These codes do not work, first is FF, second is REW
900A 0068 0000 0001 01FE 07F8

0000 006C 0000 0002 0159 0057 0015 0E7C

Again...every other button learned properly and work perfectly.

any help would be great.

Bob,

The code you have for FF is clean. The code you have for REW is garbage. Since FF does not work, you should read the whole thread linked below then follow the advice in Post #10 to use Makehex. The device you will be using is 0x01 or 1. The function code for rewind is 0x07 taken from 0x07F8.

[Link: remotecentral.com]

Once you do the double-repeat thing using Makehex, I bet the FF code will work. For rewind, you should try a short as well as a longer press during learning to try and identify the function number.

I suspect that if FF is 0x07, Rewind might be 0x08 or 8 decimal.

Lyndel