| Post 1 made on Wednesday May 4, 2005 at 03:07 |
ivoverhoef Long Time Member |
Joined:
Posts: | March 2005
15 |
|
|
Hi Guys,
I've tried almost everything and i can't understand why my RFX6000 sometimes works fine and then without changing anything doesn't work at all anymore.
I am using the TSU7000 and i know for sure i've programmed it right for RF-signals.
I can walk my house and everything works fine, but then the RFX6000 doesn't work only when i point my TSU7000 directly to the rear sde of the RFX6000.
I am thinknig of buying another RFX6000 or is it something else????????
Please you guys, help me!
|
|
| Post 2 made on Wednesday May 4, 2005 at 17:01 |
Peter Dewildt Loyal Member |
Joined:
Posts: | July 2001
6,307 |
|
|
Common causes are low batteries and interference.
I was getting the same problem and it tuned out to be caused by the subwoofer that the extender was sitting. Moved it and it hasn't happened again.
|
Peter
Pronto 1000 (retired), Pronto TSU7000, RFX6000 (retired)
Pronto 2xTSU9600, RFX9400 |
|
| Post 3 made on Wednesday May 4, 2005 at 18:08 |
ddarche Mr. RemoteQuest |
Joined:
Posts: | February 2002
2,309 |
|
|
Yes, interference as Peter mentions is probable. Look very closely at the red led on the RFX and see if it is pulsing at all, when the remote is not sending anything. Try this when your remote is not working. Cup your hands around the red LED and look closely to see if it is pulsing at all. Should be solid and steady. If it is pulsing even the slighest, probably picking up some interference.
Dave D'Arche
|
Dave D'Arche http://RemoteQuest.comFine Home Theater Remote Controls & Solutions - Programming services for most remotes |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
