|
|
|
Philips Pronto NG Family Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
TSU7000 won't learn Fast Forward
| |
|
Topic: | TSU7000 won't learn Fast Forward This thread has 5 replies. Displaying all posts. |
|
Post 1 made on Saturday April 23, 2005 at 03:10 |
I recently got a Pronto TSU7000 and am loving it. Unfortunately there's still one problem that I haven't been able to fix. I had to teach it all of my Tvio commands but that was to be expected. All of them were learned except the FF function. When I try to teach it, it either says Failed, so I obviously try again, and when it says OK, I press FF and nothing happens.
Just for kicks, I assigned the Rewind function to the FF button and when I pushed FF, my Tivo started rewinding. So I know it's not the FF button on the 7000 and my RCA remote still works fine. So somewhere between the RCA and the Pronto, something's getting messed up. Any ideas?
Nathan
|
|
Post 2 made on Saturday April 23, 2005 at 07:13 |
Lyndel McGee RC Moderator |
Joined: Posts: | August 2001 12,999 |
|
|
Please check the files section and see if there's already a TIVO PCF that you can use instead of learning the codes yourself.
|
Lyndel McGee Philips Pronto Addict/Beta Tester
|
|
Post 3 made on Saturday April 23, 2005 at 09:13 |
johnsfine IR Expert |
Joined: Posts: | September 2002 5,159 |
|
|
If you post the Pronto Hex for some working command of that device (such as rewind) we can identify the codeset and tell you the Pronto Hex for FF. (I won't have access to the files I'd need to do that until Monday. But someone else may answer sooner).
It also would be interesting to see the Pronto Hex of the attempt to learn FF where the Pronto said OK but the result didn't work.
|
|
Post 4 made on Saturday April 23, 2005 at 10:05 |
galileo01 Long Time Member |
Joined: Posts: | November 2002 236 |
|
|
Here's the code: 900A 006D 0000 0001 8530 24D0
|
Scott Harris |
|
OP | Post 5 made on Saturday April 23, 2005 at 20:01 |
Here is the code for Rewind on my Tivo:
0000 0067 0022 0002 0168 00B4 0016 0043 0016 0016 0016 0043 0016 0016 0016 0016 0016 0016 0016 0016 0016 0043 0016 0016 0016 0016 0016 0016 0016 0016 0016 0043 0016 0043 0016 0016 0016 0016 0016 0016 0016 0043 0016 0016 0016 0016 0016 0016 0016 0043 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0043 0016 0016 0016 0043 0016 0043 0016 074B 0168 0059 0016 0F1E
and here is the code that it says is working for the FF:
0000 006D 0004 0000 0055 0017 0E55 0155 0055 0017 09C0 0017
|
|
Post 6 made on Saturday April 23, 2005 at 20:38 |
Lyndel McGee RC Moderator |
Joined: Posts: | August 2001 12,999 |
|
|
This is a bad learn. Try and relearn the code by simply entering Learn mode, then single-tapping the FF button without holding it down. Do this on the remote and not with the software as you will get a better learn.
|
Lyndel McGee Philips Pronto Addict/Beta Tester
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|