Post 1 made on Wednesday April 20, 2005 at 13:05 |
pakoppan Long Time Member |
Joined: Posts: | March 2005 21 |
|
|
Here's the newbie question:
I have a SYSTEM PAGE with 4 buttons:
ON/OFF
CD
TUNER
TAPE
Making it simple:
I'd like to press CD and jump to another TS3000 "screen" where I have other buttons defined like CD start, Stop,Start and so on.
The same idea goes to TAPE and TUNER. Each one of them with it's own "screen" and corresponding buttons (whatever they are).
I set CD with Special Action = Navigate.(Is this correct?) How can I define a new "screen" (page?) in such a way that pressing CD I'm taken to the other "CD" screen with the CD options as exemplified above?
Thanks
|
**** PK _ SET_0NE *** |
|
Post 2 made on Wednesday April 20, 2005 at 14:49 |
Slade Long Time Member |
Joined: Posts: | March 2003 54 |
|
|
You are making this way too difficult...in ProntoEdit double click on the button to bring up the button properties. Now simply use "CREATE JUMP" to jump to whatever page you want. You can also send IR codes (by "create link" to another button that has the code you want to send). You can also make a beep if you want and add a delay if necessary between IR codes being sent...ALL WITH one button press on the remote!!
|
|
Post 3 made on Wednesday April 20, 2005 at 17:36 |
Peter Dewildt Loyal Member |
Joined: Posts: | July 2001 6,307 |
|
|
And anything you put on the System Page will appear on every other page. You would normally have the buttons you describe on the Home Page (unless you want them on every page).
|
Peter Pronto 1000 (retired), Pronto TSU7000, RFX6000 (retired) Pronto 2xTSU9600, RFX9400 |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.