| Post 1 made on Saturday April 16, 2005 at 16:04 |
I have attemted to transfer my 5200 ccf to a 5400 remote. I uploaded ccf from 5200 remote using touch screen, converted file with wizz and downloaded to 5400 without a hitch. The transferred pages appear correct and the 5400 emulator, and 5400 remote works properly however none of the ir commands work. Am I missing something?? Do I have to manually learn every ir command for each button?
|
Victor |
|
| Post 2 made on Saturday April 16, 2005 at 19:16 |
Peter Dewildt Loyal Member |
Joined:
Posts: | July 2001
6,307 |
|
|
Have yuo looked at your PCF to see if the comamnds are in it?
|
Peter
Pronto 1000 (retired), Pronto TSU7000, RFX6000 (retired)
Pronto 2xTSU9600, RFX9400 |
|
| OP | Post 3 made on Sunday April 17, 2005 at 00:53 |
The ir commands appear to be in the pcf.
|
Victor |
|
| Post 4 made on Monday April 18, 2005 at 18:18 |
Lyndel McGee RC Moderator |
Joined:
Posts: | August 2001
12,999 |
|
|
If the codes are in the CCF and in the PCF, then there's something else wrong.
I suspect that your devices may set to use RF versus IR. This is something you should check and verify. See the manual or the Help file about switching between IR and RF.
If you are still having problems and the above does not solve the problem, I have only one additional answer. Call Marantz or your dealer as your remote could be broken.
|
Lyndel McGee
Philips Pronto Addict/Beta Tester
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
