| Post 1 made on Wednesday June 6, 2012 at 09:26 |
I have a perfectly working tsu2000 and would like to if possible work with my new
laptop with windows 7. I have installed a GIGAWARE to acomadate USB to Serial to 1/8" stereo jack. I try to upload but get either " not connected","Macros did not run", or not compatible with 32 bit. I went to Microsoft help to allow for the ports to accept 32 bit...... no luck. I tried downloading on of the programs from Remote Central.......no luck. Any help would be appreciated.
Thanks in advance for looking in.
|
|
| Post 2 made on Monday June 11, 2012 at 14:48 |
Jim_R Lurking Member |
Joined:
Posts: | October 2011
2 |
|
|
I am using a rather generic USB to Serial dongle with the original pronto cable, as long as I force the Serial port to use Com1, I can connect and upload/download to either an TS-1000 or TSU-2000. The issue I have is with Prontoedit4 and button galleries - I can't drag & drop, I have to cut and past from other devices.
|
|
| Post 3 made on Monday June 11, 2012 at 18:04 |
Lyndel McGee RC Moderator |
Joined:
Posts: | August 2001
12,890 |
|
|
The USB to Serial dongle must be on the lowest unused COM port. For example, if mouse is on COM1, then you must use COM2. There is info about this in the FAQ.
|
Lyndel McGee
Philips Pronto Addict/Beta Tester
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
